Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /home/carrcivilenginee/public_html/wp-content/plugins/revslider/includes/output.class.php on line 3706

Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /home/carrcivilenginee/public_html/wp-content/plugins/all-in-one-seo-pack/modules/aioseop_opengraph.php on line 848
Nitrogen Sleeve Endseal Repair at Mill Ride, Ascot – Carr Civil Engineering

Nitrogen Sleeve Endseal Repair at Mill Ride, Ascot

Sheeted & framed excavation of 5 metres x 5 metres x 4 metres was used to excavate down on to a leaking end seal. Full temporary works design was put into place before any work commenced.

Once the end seal and filling points were exposed, the sleeve was then pressurised,  and it was found that the end seal was offset and not holding pressure. A decision was made by the client that a bespoke end seal was to be manufactured and installed.  Once the endseal was installed the sleeve was then repressurised with nitrogen and is now holding pressure, resulting in the sleeve now being compliant.

 

Recent Posts

Remove Broken Paving Slabs at Frensham AGI

5 years ago

Crowthorne Reinstatement Project

5 years ago

Lordswood Pressure Regulation Site (PRS)

5 years ago

Our Projects

Carr Civil Engineering

  • 4 Longham Business Centre, 168 Ringwood Rd, Ferndown Dorset BH22 9BU
  • +44 (0) 1202 578697
  • 8.30am - 4.30pm